Cable Tracker
- Judge continuity of the cables or wire
- Track the cables or wires and diagnose the break point
- Recive the tone signal on the cable or wires (telephone line)
- Identify the state in the working telephone line (clear, ring, busy)
- Send a single solid tone or dual alternating tone to the object cables or wires
Lan Tester profesional cu display
- Test the cat5e/cat6/UTP/STP cable and the coaxial cable as well as the telephone wire, etc
- the situations like breaking at the set point, the short circuit, the cross pair wire and the separated pair wire as well the reversed pair wire, etc
- through the electrical resistance, to measure the lengh of the cable wire and can find out the position of the failure
- check and verify the maping table of the wire connection
- in the calibration mode, the unit of lengh can be converted from “meters” to “feet”
- the coeficient after the calibration can be saved, to be modified untill the calibration the next time
- display the connection on bouth ends
- if the button is not used within 10 minutes, it will automaticlly shut off








